The VirtuaLine SWITCH floor line projector is a sustainable and cost-effective safety solution.
The VirtuaLine SWITCH ground line projector is a sustainable and profitable safety solution to consider in order to limit the risk of accidents and harmonize traffic in an area where pedestrians and forklifts coexist. Currently awaiting a patent, this device combining practicality, profitability and adaptability is the brand's most recent virtual line projection equipment model.
VirtuaLine SWITCH projects virtual lines on the ground to delimit traffic areas, alleys and paths within an industrial building, a storage warehouse or even a loading dock. The device is equipped with a high-performance LED lamp, with a nominal power of 80 Watts, which can emit lights of various colors (red and green), and whose lifespan is approximately 30,000 hours under the best conditions, i.e. at about 25°C. The projection distance can, in turn, be up to 17 meters and the thickness of the line is controllable. In addition, it is possible to connect VirtuaLine SWITCH to various sensors or press buttons to benefit from an intelligent signaling process. For example, the color of the line that delimits a pedestrian zone can automatically turn from green to red to alert users of the arrival of a nearby forklift when a motion sensor is associated with the Smart Trigger Controller.
The VirtuaLine SWITCH floor projector is much more interesting than traditional painted floor markings or adhesive tapes.
The lines projected by VirtuaLine SWITCH are much more visible than floor markings and adhesive tapes, especially in areas where the light level is particularly low. In addition, the fact that the light can change color to warn users in case of imminent danger increases everyone's vigilance. However, it should be noted that the brightness of the lines as well as their maximum thickness and length depend largely on the mounting height of the device.
Floor markings need to be repainted when they become less visible and adhesive tapes need to be changed regularly. In addition to generating more or less high costs in the long term, all this affects productivity since the passage must be blocked for a defined period of time during the work, and even until the paint dries. The virtual line projector does not require any such maintenance and is therefore a more cost-effective solution.
Simply move the projector and install it in another location in case of temporary or permanent reconfiguration of the space within the building. All of this is done in a few minutes. With floor marking or adhesive tape, the process is more time-consuming since you have to strip, then repaint or stick another tape.
VirtuaLine SWITCH is the best solution to avoid collisions between industrial vehicles and pedestrians within an establishment and therefore optimize the safety of all users. This device is both efficient and profitable. In addition, it is very easy to adapt to any reconfigurations of space carried out inside the building. We are at your disposal if you need more information about it or the other solutions we offer.